MORA Smart WiFi 10 in 1 63A Protection Switch

The MORA Smart WiFi 10 in 1 63A Protection Switch combines remote circuit control, scheduling, electrical monitoring and adjustable protection functions in a compact DIN-rail device. It is designed for compatible single-phase AC circuits in homes, shops, offices and selected solar-inverter installations.

Through the supported mobile application, users can remotely switch a connected circuit, create operating schedules and review available electrical information. Manual control remains useful at the panel, while protection settings can respond to sustained abnormal voltage, excessive current and configured leakage conditions. Exact app features and offline behaviour depend on the supplied model and its instructions.

MORA Smart WiFi 10 in 1 63A Protection Switch Features

• WiFi app and manual circuit control
• Programmable on/off schedules and timer functions
• Adjustable over-voltage and under-voltage thresholds
• Adjustable over-current or overload settings
• Configurable leakage-monitoring function
• Digital display for supported voltage and current information
• Automatic reconnection after configured safe conditions return
• DIN-rail mounting for a compatible distribution panel
• Rated up to 63A subject to circuit design and installation conditions

Product Specifications

The listed voltage range describes the device’s operating or adjustable range; it is not a recommendation to operate appliances at either extreme. Voltage, current, delay and leakage settings must be selected for the connected equipment and the installation requirements.

Smart Control and Scheduling

Remote switching is useful for non-critical loads that need planned operation, such as selected lighting, signage, shop equipment or compatible household circuits. Scheduling can automate routine on/off times and help avoid unnecessary operating hours. However, remote access depends on a compatible WiFi network, internet service and the supported app platform.

Do not use remote control as the only safety isolation method. Anyone working on the circuit must isolate the supply with an approved local device, lock it out where required and verify that conductors are dead before touching them.

Suitable Applications

This MORA smart switch may be considered for compatible home sub-circuits, offices, shops and selected solar-inverter output circuits. A 63A marking does not mean every panel or cable can safely carry 63A continuously. The maximum usable load depends on conductor size, upstream protection, enclosure temperature, duty cycle and terminal conditions.

Electrical Safety and Protection Coordination

This device is not a universal replacement for a correctly rated MCB or MCCB, RCCB/RCD, dedicated surge protection device (SPD), proper earthing or approved isolation. Leakage monitoring should not be treated as certified personal shock protection unless the exact model documentation and local electrical requirements confirm that use.

A qualified electrician should confirm cable size, short-circuit protection, earth-leakage requirements, terminal torque, panel ventilation and available DIN-rail space. For motors, pumps, air conditioners and other inductive loads, the electrician should determine whether the smart switch should operate a suitably rated contactor rather than switching the load directly.

Pre-Purchase Checklist

• Confirm the supply is single phase and compatible with the device
• Calculate maximum and continuous load current
• Verify cable size and upstream breaker coordination
• Confirm WiFi coverage at the distribution panel
• Check the required app and phone compatibility
• Confirm whether a contactor is required for the connected load

Buy from HN Electric Pakistan

Compare more smart WiFi devices, suitable circuit breakers, compatible distribution boxes and dedicated surge protection devices at HN Electric.

Order the MORA Smart Protection Switch

Choose the MORA Smart WiFi 10 in 1 63A Protection Switch when your compatible circuit needs app control, scheduling and configurable electrical monitoring in one DIN-rail unit. Have a qualified electrician confirm suitability and complete the installation.