Schneider LC1D18 Magnetic Contactor 18A 220V

The Schneider LC1D18 Magnetic Contactor is a TeSys D contactor designed for reliable switching and control of compatible motors and electrical loads. The LC1D18M7 version provides an 18A AC-3 rating, three main power poles and a 220V AC control coil, making it suitable for properly designed motor-control panels and other compatible electrical applications.

For customers looking for a Schneider LC1D18 contactor in Pakistan, checking the complete model reference is important before ordering. Schneider offers the LC1D family in different current ratings and coil-voltage configurations, so the model suffix should always be checked against the control circuit requirements.

The LC1D18M7 is a three-pole contactor with three normally open main contacts. It is designed for motor-control applications and can be used in suitable industrial, commercial, HVAC and electrical control-panel installations. Schneider specifies the model for AC-3 operation up to 18A and applications up to 440V, subject to the applicable utilisation category and installation conditions.

The contactor also includes auxiliary contacts that can be used for control, interlocking and signalling circuits. This makes it suitable for conventional motor starters and electrical control systems where auxiliary contacts are required.

When replacing an existing contactor, the replacement should not be selected based only on its physical size or general appearance. Check the motor’s operating current, AC-3 rating, control-coil voltage, number of poles and complete Schneider reference. For the LC1D18M7, the control coil is rated at 220V AC, 50/60Hz, so the control circuit must be compatible with this specification.

HN Electric supplies electrical and solar products to customers across Pakistan. If you are replacing an existing Schneider contactor and are unsure about the correct model, compare the complete reference printed on the old contactor before ordering.

The Schneider LC1D18 is suitable for compatible motor-control applications where an 18A AC-3 contactor is required. It can be used in properly designed motor starters, electrical control panels, HVAC equipment and other appropriate industrial or commercial systems.

If you are searching for a Schneider LC1D18 contactor in Pakistan, check the current price, availability and technical specifications at HN Electric before placing your order. For bulk requirements or help identifying the correct variant, provide the existing contactor reference, motor rating and required coil voltage.

FAQs

1. What is the Schneider LC1D18M7 rating?
LC1D18M7 is rated at 18A AC-3 and has three main poles. Schneider specifies the product for applications up to 440V.

2. What coil voltage does LC1D18M7 use?
The M7 version uses a 220V AC, 50/60Hz control coil.

3. What is Schneider LC1D18 used for?
It is primarily designed for compatible motor-control applications and can be used in suitable industrial, commercial and HVAC control systems.

4. Is LC1D18 the same as a 32A contactor?
No. LC1D18 is an 18A AC-3 model. A 32A Schneider contactor is a different LC1D model/reference.