Tomzn 1P 1500V DC Solar Fuse Holder (10×85 / 14×85) with gPV Fuse

₨ 1,850

  • 1-pole 1500 V DC DIN-rail PV fuse holder
  • Takes 10×85 or 14×85 gPV fuses, 2–50 A official range
  • Supplied with a 25 A gPV fuse
  • Original TOMZN, delivery across Pakistan
  • The live price is shown at the top of this page.
Brand new, factory seal-packed stock
Open the box and check it on delivery (Cash on Delivery)
Nationwide Cash on Delivery
Tested before dispatch
Estimated shipping time: 48 to 72 hours
Visit our Lahore shop: 1st Floor, A-8/16, H-Block Commercial Zone, Valencia, Lahore. WhatsApp 0329 1654950
Installation and technical support available
SKU: TOMZN-PV-FUSE-HOLDER-1500V-1P Category: Tags: ,
Description

Tomzn 1500V DC solar fuse holder in Pakistan

This TOMZN 1-pole 1500 V DC fuse holder takes 10×85 or 14×85 gPV fuses and is supplied with one fuse. The live price is shown at the top of this page. Original TOMZN stock, with delivery across Pakistan.

Specifications

Type1-pole DIN-rail PV fuse holder, supplied with one gPV fuse
Fuse size10×85 mm or 14×85 mm PV / gPV fuse
Rated voltage1500 V DC (official maximum)
Holder current rangeOfficial page: suitable for PV fuses rated 2, 3, 4, 6, 10, 15, 20, 25, 30, 32, 35, 40 and 50 A
Fuse suppliedThis listing is supplied with a 25 A gPV fuse; ask if you need a different official rating
Mounting35 mm DIN rail
ConstructionHigh-temperature-resistant plastics, elevated insulation (official page)
Typical usePV string and combiner protection on 1000–1500 V arrays

Specifications from the TOMZN official store (tomzn.com) product page for the 1P 1500V PV fuse holder.

Where to use it

  • Each PV string in a 1500 V or high Voc combiner box
  • Commercial and industrial arrays whose cold-weather Voc is above a 1000 V 10×38 fuse
  • Replacement of a 10×85 / 14×85 gPV holder and fuse on an existing 1500 V board

Pakistan installation example

On a large rooftop or ground-mount array in Punjab or Sindh, string fuses belong in the combiner, one per string, before the DC isolator and the inverter. If the string Voc in winter can exceed 1000 V, specify this 1500 V holder rather than a 10×38 1000 V holder, and size the gPV fuse from the module Isc and the inverter maker’s instructions.

Installation and selection tips

  • Never open the holder under load — isolate first.
  • Use only gPV / PV fuses of the 10×85 or 14×85 size; an ordinary AC fuse does not belong here.
  • Land 75 °C or 90 °C copper cable in the official range and torque the terminals firmly.
  • If your strings still sit comfortably under 1000 V, the smaller TOMZN TOPV-32 10×38 holder on our site may be the better fit.

Complete your solar DC protection

Pair it with the Tomzn TOPV-32 10×38 DC fuse holder, GA&DA GDPV-32 1000V fuse holder, CNC YCF8-32HPV 1000V fuse holder. Browse all solar products, or read AC and DC protection for solar inverters, DC isolator vs DC breaker and solar system installation guide for Pakistan.

Why buy from HN Electric

Original TOMZN stock, delivery across Pakistan, and free sizing help on WhatsApp. Cash on delivery is available.

FAQs

What fuse size does this holder take?

The official TOMZN page covers 10×85 mm or 14×85 mm PV / gPV fuses, up to 1500 V DC. It is not the smaller 10×38 holder used on many 1000 V strings.

Which fuse current is supplied?

The official holder is listed for 2 A to 50 A gPV fuses. This listing is supplied with a 25 A fuse. Tell us if you need a different official rating.

Can I open the holder to change the fuse while the array is live?

No. Do not open a DC fuse holder under load. Isolate the string with a DC isolator first, then change the fuse.

When do I need a 1500 V holder instead of a 1000 V 10×38 holder?

Use this 1500 V, 10×85 / 14×85 holder when the array’s maximum Voc (including cold-weather rise) approaches or exceeds 1000 V, or when the project specification calls for 1500 V gPV fuses.

Is it DIN-rail mount?

Yes. The official page specifies 35 mm DIN-rail mounting, for a combiner box or inverter DC enclosure.

Reviews (0)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Shipping & Delivery

Shipping & Delivery Across Pakistan

HN Electric carefully packs electrical and solar products for delivery across Pakistan. Delivery time and charges depend on the destination, product size and courier availability, and are confirmed during order processing.

Before You Order

  • Confirm the product rating, quantity and delivery address before checkout.
  • Contact our team for urgent orders, bulk quantities or installation guidance.
  • Inspect the parcel on arrival and report any transit damage promptly.

Need a delivery estimate or technical help? Contact HN Electric on WhatsApp before placing your order.