Kripal UKPD32-PFLH4 32A 4P 1200V DC Isolator Switch IP66

₨ 5,499

  • UKPD32-PFLH4, 32 A, 4-pole, 1200 V DC (official KRIPAL rating)
  • IP66 surface-mount enclosure, lockable rotary handle
  • IEC 60947-3, DC-21B, load-breaking isolator
  • Original KRIPAL, delivery across Pakistan
  • The live price is shown at the top of this page.
Brand new, factory seal-packed stock
Open the box and check it on delivery (Cash on Delivery)
Nationwide Cash on Delivery
Tested before dispatch
Estimated shipping time: 48 to 72 hours
Visit our Lahore shop: 1st Floor, A-8/16, H-Block Commercial Zone, Valencia, Lahore. WhatsApp 0329 1654950
Installation and technical support available
SKU: KRIPAL-UKPD32-PFLH4-32A Category: Tags: ,
Description

Kripal UKPD32-PFLH4 DC isolator in Pakistan

The KRIPAL UKPD32-PFLH4 is a 32 A, 4-pole, 1200 V DC isolator in an IP66 outdoor enclosure, made for isolating a PV array from the inverter. The live price is shown at the top of this page. Original KRIPAL stock, with delivery across Pakistan.

Specifications

ModelKRIPAL UKPD32-PFLH4
FunctionPV DC isolating switch, load-breaking
Rated current32 A (official DC-21B ratings also include 16 A and 25 A in the same series)
Poles4-pole, with multiple official wiring options
Rated operational voltage (Ue)1200 V DC (official KRIPAL rating for UKPD32-PFLH4)
Insulation / impulseUi 1200 V DC, Uimp 8 kV
StandardIEC 60947-3, utilisation category DC-21B; TUV certified (official page)
EnclosureIP66 surface-mount, UV-resistant outdoor housing
Conductor4–16 mm², M4 terminals, 2.5 N·m tightening torque
Durability20,000 mechanical operations, 500 electrical operations (official page)
Ambient temperature−25 °C to +85 °C
Typical useArray isolation at a rooftop or ground-mount PV inverter, combiner or controller

Specifications from the KRIPAL official product page for UKPD32-PFLH4 (kripal.net).

Where to use it

  • Outdoor isolation of a rooftop or ground-mount PV array
  • The DC isolation point at a string inverter, controller or 1–4 string combiner
  • A lockable maintenance disconnect beside the array, as required by many solar installation practices

Pakistan installation example

On a house or commercial rooftop, the isolator usually sits in reach of the array or at the inverter, so a technician can turn the handle to OFF and lock it before working on the DC cables. Check that the array’s maximum Voc, including cold winter mornings in northern Pakistan, stays inside the official 1200 V DC rating, and land the four poles as shown on the official KRIPAL drawing.

Installation and selection tips

  • Size the isolator from the official 1200 V DC, 32 A, DC-21B ratings, not from a higher figure used on some sales listings.
  • Use the official 4-pole wiring diagram; using fewer poles in series lowers the voltage the switch can safely break.
  • An isolator does not replace string fuses or a DC MCB.
  • Keep cable glands tight so the IP66 rating is not lost, and leave the handle clear to operate and lock.

Complete your solar DC protection

Pair it with the CNC YCISC8-32XPV E4 4P isolator, CNC YCISC8-32XPV E2 isolator, Mora AESPV32 ELR1 32A IP66 isolator. Browse all solar products, or read DC isolator vs DC breaker, AC and DC protection for solar inverters and solar system installation guide for Pakistan.

Why buy from HN Electric

Original KRIPAL stock, delivery across Pakistan, and free sizing help on WhatsApp. Cash on delivery is available.

FAQs

What is the official voltage rating?

KRIPAL rates the UKPD32-PFLH4 at 1200 V DC (Ue and Ui), 32 A, 4-pole, utilisation category DC-21B, to IEC 60947-3. Use this official 1200 V figure when you check it against your array Voc.

Is it suitable for outdoor mounting?

Yes. The official page specifies an IP66 surface-mount enclosure for outdoor use next to an array or inverter, with a lockable rotary handle.

Can it break load, or is it only for isolation off-load?

KRIPAL states that the UKPD32-PFLH4 is capable of load-breaking operation, in category DC-21B. It is still an isolator, not a substitute for a DC MCB or string fuses.

How is it wired?

It is a 4-pole isolator. Official drawings show several series-wiring options so that the four poles can be used to reach the rated DC voltage. Follow the official wiring diagram and the inverter maker’s isolation instructions.

What cable size does it take?

Official terminals are 4–16 mm², M4 screws, 2.5 N·m torque.

Reviews (0)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Shipping & Delivery

Shipping & Delivery Across Pakistan

HN Electric carefully packs electrical and solar products for delivery across Pakistan. Delivery time and charges depend on the destination, product size and courier availability, and are confirmed during order processing.

Before You Order

  • Confirm the product rating, quantity and delivery address before checkout.
  • Contact our team for urgent orders, bulk quantities or installation guidance.
  • Inspect the parcel on arrival and report any transit damage promptly.

Need a delivery estimate or technical help? Contact HN Electric on WhatsApp before placing your order.