GA&DA GDPV-32 1P 32A 1000V DC Solar Fuse Holder (10×38)

₨ 999

  • Rated voltage: 1000 V DC
  • Rated current: up to 32 A
  • Fuse size: 10 × 38 mm cylindrical gPV link
  • Poles: 1P (2P version also made)
  • Original GA&DA, delivery across Pakistan
Brand new, factory seal-packed stock
Open the box and check it on delivery (Cash on Delivery)
Nationwide Cash on Delivery
Tested before dispatch
Estimated shipping time: 48 to 72 hours
Visit our Lahore shop: 1st Floor, A-8/16, H-Block Commercial Zone, Valencia, Lahore. WhatsApp 0329 1654950
Installation and technical support available
SKU: GADA-GDPV-32-1P Category: Tags: ,
Description

GA&DA GDPV-32 DC fuse holder price in Pakistan

The GA&DA GDPV-32 1P 32A 1000V DC Solar Fuse Holder (10×38) price in Pakistan at HN Electric is shown at the top of this page. The GA&DA GDPV-32 is a DIN-rail fuse base for 10×38 mm gPV solar fuse links up to 32 A at 1000 V DC. gPV fuses are made for photovoltaic strings: they clear the reverse current that healthy strings can push into a faulty one, and they do it on high DC voltage where an ordinary AC fuse would not be safe. The hinged carrier pulls out to give a visible break when you work on the string.

Specifications

ModelGA&DA GDPV-32, 1-pole fuse base
Rated voltage1000 V DC
Rated currentup to 32 A
Fuse size10 × 38 mm cylindrical gPV link
Poles1P (2P version also made)
Mounting35 mm DIN rail
BodyFlame-retardant thermoplastic, hinged pull-out carrier
ComplianceIEC / RoHS

Specifications from the GA&DA official product page (cngandian.com). Images: GA&DA.

Where to use it

  • String fusing in PV combiner boxes when three or more strings are paralleled on one MPPT
  • Protecting panel strings on systems up to 1000 V DC
  • Inverter DC input protection where the inverter maker asks for string fuses
  • Low-cost DC protection on battery and DC load circuits within 32 A

Pakistan installation example

When an installer in Lahore, Rawalpindi or Peshawar parallels three strings into one MPPT – common on 15–25 kW factory and school roofs – a short in one string can be fed by the other two. A gPV fuse on each string stops that. For one or two strings per MPPT most inverters do not need string fuses; a DC breaker and isolator are normally enough.

Installation and selection tips

  • Rule of thumb: fuse rating about 1.5–2 × panel Isc and never above the maximum series-fuse rating on the panel label.
  • Never open the fuse carrier under load – switch off the inverter and isolator first.
  • Use only gPV 10×38 mm fuses; glass or automotive fuses are not safe on solar DC.
  • Fit one holder on the + and one on the − of each string if your design requires double-pole fusing.
  • Tighten terminals well and use 4–6 mm² copper solar cable.

Complete your solar DC protection

Pair it with the CNC YCF8-32HPV 1P DC 1000V Solar Fuse Holder with 20A 10×38 gPV Fuse, CNC YCB8-63PV 4P DC 1000V 63A Solar DC MCB Breaker, Tomzn 2P DC 1000V Solar Mini Circuit Breaker, TOMZN DC SPD 1000V 2P Solar Surge Protection Device, MORA Bulgaria Fuse Type MC4 solar connector and 6mm Flexible DC Heatproof Wire – Solar Cable. Browse all solar products, or read our guides: AC and DC protection for solar inverters, DC breaker size for a 10kW solar system and DC isolator vs DC breaker.

Why buy from HN Electric

Original GA&DA stock, delivery across Pakistan and free sizing help from our team on WhatsApp – send your panel and inverter model and we will tell you the right breaker, fuse and connector ratings.

FAQs

What is the GA&DA GDPV-32 DC fuse holder price in Pakistan?

The GA&DA GDPV-32 DC fuse holder price in Pakistan at HN Electric is shown at the top of this page. Fuse links are sold separately – ask us for 10×38 gPV fuses in the rating you need.

What is a gPV fuse?

gPV is the IEC 60269-6 class for photovoltaic fuses. They break low fault currents at high DC voltage, which normal AC fuses cannot do safely.

Do I need DC fuses in my solar system?

Usually only when three or more strings are connected in parallel. With one or two strings per MPPT a DC breaker and isolator are normally enough.

Which fuse rating should I choose?

Take about 1.5–2 × your panel’s Isc and stay below the panel’s maximum series-fuse rating. For most 580 W panels (Isc around 13–14 A) a 20–25 A gPV fuse is typical.

Kya yeh fuse holder DIN rail par lagta hai?

Ji haan, yeh 35 mm DIN rail par fit hota hai aur solar DB ya combiner box mein lag jata hai.

Reviews (0)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Shipping & Delivery

Shipping & Delivery Across Pakistan

HN Electric carefully packs electrical and solar products for delivery across Pakistan. Delivery time and charges depend on the destination, product size and courier availability, and are confirmed during order processing.

Before You Order

  • Confirm the product rating, quantity and delivery address before checkout.
  • Contact our team for urgent orders, bulk quantities or installation guidance.
  • Inspect the parcel on arrival and report any transit damage promptly.

Need a delivery estimate or technical help? Contact HN Electric on WhatsApp before placing your order.