Schneider LC1D40004 4 Pole 60A Contactor 220V

The Schneider LC1D40004 Magnetic Contactor is a 4-pole contactor designed for electrical switching and control applications where four normally open power contacts are required. The LC1D40004M7 belongs to Schneider Electric’s TeSys D contactor family and features a 220V AC 50/60Hz control coil.

Unlike the standard 3-pole LC1D contactors commonly used for three-phase motor control, the LC1D40004 is a 4-pole, 4NO contactor intended primarily for AC-1 load applications. Schneider specifies a 60A AC-1 rating at up to 440V for this reference. This makes the product particularly relevant for resistive or non-inductive loads and control-panel applications where four switching poles are required.

The LC1D40004M7 uses a 220V AC 50/60Hz coil and screw-clamp terminals for connection. Its 4NO contact configuration provides four normally open main contacts that operate together when the contactor coil is energized. This configuration can be useful in electrical control systems that require switching through four separate circuits or conductors.

When searching for a Schneider LC1D40004 in Pakistan, customers should verify the complete model number before purchasing. The M7 suffix identifies the 220V AC 50/60Hz coil version, while other suffixes can represent different coil voltages. Matching the complete reference is therefore important when replacing an existing contactor.

The LC1D40004M7 is also an older Schneider reference. Schneider currently marks this exact model as discontinued and lists LC1DT60AM7 as a replacement on several regional product pages. However, lifecycle information varies by Schneider market, so customers looking for an original LC1D40004M7 should confirm availability and exact replacement requirements before ordering.

HN Electric can use this product page for customers searching for a Schneider LC1D40004 contactor in Pakistan, particularly electricians, panel builders, maintenance teams, contractors and industrial users who need a 4-pole 60A contactor with a 220V AC control coil.

Before installation, verify the load type, rated current, operating voltage, control voltage, utilization category and wiring requirements. The contactor should be installed and commissioned by a qualified electrical professional according to Schneider Electric documentation and applicable electrical safety requirements.

FAQs

Q1. What is the Schneider LC1D40004M7 rating?
It is a 60A AC-1 4-pole contactor for the specified operating conditions. It should not be marketed as a 60A AC-3 motor contactor.

Q2. How many poles does LC1D40004M7 have?
It has 4 poles with 4 normally open (4NO) main contacts.

Q3. What is the coil voltage?
The M7 version uses a 220V AC 50/60Hz coil.

Q4. Is LC1D40004M7 discontinued?
Yes. Schneider currently marks the reference as discontinued. Schneider lists LC1DT60AM7 as a replacement on several regional pages, although lifecycle/replacement information differs by market.